A. Banerjee, H. Feng, and E. V. Bordatchev, Process planning for Floor machining of 2??D pockets based on a morphed spiral tool path pattern, Computers & Industrial Engineering, vol.63, issue.4, pp.971-979, 2012.
DOI : 10.1016/j.cie.2012.06.008

P. Belotti, J. Lee, L. Liberti, F. Margot, and A. Wachter, Branching and bounds tightening techniques for non-convex MINLP. Optimization Methods and Software, pp.4-5597, 2009.

S. Calvel and M. Mongeau, Black-box structural optimization of a mechanical component, Computers & Industrial Engineering, vol.53, issue.3, pp.514-530, 2007.
DOI : 10.1016/j.cie.2007.05.009

A. Damir, E. Ng, and M. Elbestawi, Force prediction and stability analysis of plunge milling of systems with rigid and flexible workpiece, The International Journal of Advanced Manufacturing Technology, vol.22, issue.9-12, pp.9-12853, 2010.
DOI : 10.1007/s00170-010-2982-y

I. Danis, F. Monies, P. Lagarrigue, and N. Wojtowicz, Cutting forces and their modelling in plunge milling of magnesium-rare earth alloys, The International Journal of Advanced Manufacturing Technology, vol.258, issue.5-6, pp.1801-1820, 2016.
DOI : 10.1007/s00170-015-7826-3

I. Danis, N. Wojtowicz, F. Monies, and P. Lagarrigue, Influence of dry plunge-milling conditions on surface integrity of magnesium alloys, International Journal of Mechatronics and Manufacturing Systems, vol.7, issue.2/3, pp.141-156, 2014.
DOI : 10.1504/IJMMS.2014.064750

T. Finzer, High Speed Machining (HSC) of Sculptured Surfaces in Die and Mold Manufacturing, Machining Impossible Shapes, number 18 in IFIP ? The International Federation for Information Processing, pp.333-341, 1999.
DOI : 10.1007/978-0-387-35392-0_34

R. Fourer and D. M. Gay, The AMPL Book, 2002.

P. Gilles, F. Monies, and W. Rubio, Optimum orientation of a torus milling cutter: Method to balance the transversal cutting force, International Journal of Machine Tools and Manufacture, vol.47, issue.15, pp.472263-2272, 2007.
DOI : 10.1016/j.ijmachtools.2007.06.003

F. Y. Han, D. H. Zhang, M. Luo, and B. H. Wu, Optimal CNC plunge cutter selection and tool path generation for multi-axis roughing freeform surface impeller channel, The International Journal of Advanced Manufacturing Technology, vol.71, pp.9-121801, 2014.

H. Juan, S. F. Yu, and B. Y. Lee, The optimal cutting-parameter selection of production cost in HSM for SKD61 tool steels, International Journal of Machine Tools and Manufacture, vol.43, issue.7, pp.679-686, 2003.
DOI : 10.1016/S0890-6955(03)00038-5

J. H. Ko and Y. Altintas, Time domain model of plunge milling operation, International Journal of Machine Tools and Manufacture, vol.47, issue.9, pp.1351-1361, 2007.
DOI : 10.1016/j.ijmachtools.2006.08.007

F. Koenigsberger and A. Sabberwal, An investigation into the cutting force pulsations during milling operations, International Journal of Machine Tool Design and Research, vol.1, issue.1-2, pp.15-33, 1961.
DOI : 10.1016/0020-7357(61)90041-5

J. Lee and S. Leyffer, Mixed integer nonlinear programming, 2011.
DOI : 10.1007/978-1-4614-1927-3

K. Moussaoui, F. Monies, M. Mousseigne, P. Gilles, and W. Rubio, Balancing the transverse cutting force during inclined milling and effect on tool wear: application to Ti6Al4V, The International Journal of Advanced Manufacturing Technology, vol.118, issue.1???3, pp.1859-1880, 2016.
DOI : 10.1007/s00170-015-7518-z

M. Rauch and J. Hascoet, Selecting a milling strategy with regard to the machine tool capabilities: application to plunge milling, The International Journal of Advanced Manufacturing Technology, vol.41, issue.9, pp.1-447, 2012.
DOI : 10.1007/s00170-011-3498-9

J. X. Ren, C. F. Yao, D. H. Zhang, Y. L. Xue, and Y. S. Liang, Research on tool path planning method of four-axis high-efficiency slot plunge milling for open blisk, The International Journal of Advanced Manufacturing Technology, vol.532, issue.533, pp.101-109, 2009.
DOI : 10.1007/s00170-009-2153-1

H. Schulz, High-speed machining, Manufacturing Technologies for Machines of the Future, pp.197-214, 2003.

C. Sun, Y. Wang, and N. Huang, A new plunge milling tool path generation method for radial depth control using medial axis transform, The International Journal of Advanced Manufacturing Technology, vol.17, issue.3, pp.1575-1582, 2015.
DOI : 10.1007/s00170-014-6375-5

J. Tlusty and P. Macneil, Dynamics of cutting forces in end milling, Annals CIRP, vol.24, pp.21-25, 1975.

K. Zhuang, X. Zhang, D. Zhang, and H. Ding, On cutting parameters selection for plunge milling of heat-resistant-super-alloys based on precise cutting geometry, Journal of Materials Processing Technology, vol.213, issue.8, pp.1378-1386, 2013.
DOI : 10.1016/j.jmatprotec.2013.03.007

K. Zhuang, X. Zhang, X. Zhang, and H. Ding, Force Prediction in Plunge Milling of Inconel 718, Intelligent Robotics and Applications, number 7507 in Lecture Notes in Computer Science, pp.255-263, 2012.
DOI : 10.1007/978-3-642-33515-0_26